TOPIC: Astrix's PE journey (PMMA/Chem PE/extender/pump etc)
Re: Astrix's PE journey (PMMA/Chem PE/extender/pump etc)
10 years 1 month ago #1292695656- astrix1981
-
Topic Author
- Offline
- General
-
- Posts: 30
- Thanks: 0
EG after pumping:
EG near Glan: 5 5/8
EG near MS: 5 6/8
EG near base: 6 3/8
EL not BP: 5 7/8 - 6"
I couldnt get a photo ELBP not stretched but its like mentioned above 6 1/2+
Also ELBP fully stretched hits 7.0
Apologize for photo quality man its incredibly incredibly hard to stay max hard, get the measuring thing in correct position/place all the while making sure the photo comes out somewhat reasonably well enough to be worth anything and staying hard so by the time I was getting the right shot I was losing erectness but I think the numbers are pretty close to the actual.
So gents, I guess I apprehensively say that I do feel there has been some success in lengthening although maybe not as obvious and apparent as I'd like it to be to be able to have a firm statement on it. I will continue the CHEM PE over the coming months and hopefully have some results more concrete and worthwhile to report - main issue I have is that I dont know what the starting numbers were or at least I have a doubt about them whether I measured in the same manner as before what would they be. Dr. A does have my BP fully stretched length so I guess the test will be what was the reading he recorded when we started this.
The mission continues.... I will return for PMMA before end of year Round 2 and am committed to adding PMMA to the Dick until its 7.0+.
Please Log in or Create an account to join the conversation.
Re: Astrix's PE journey (PMMA/Chem PE/extender/pump etc)
10 years 1 week ago #1292967706Re: Astrix's PE journey (PMMA/Chem PE/extender/pump etc)
10 years 6 days ago #1292975636Please Log in or Create an account to join the conversation.
Re: Astrix's PE journey (PMMA/Chem PE/extender/pump etc)
9 years 11 months ago #1293172802- astrix1981
-
Topic Author
- Offline
- General
-
- Posts: 30
- Thanks: 0
I delayed 2nd round but i will go for it soon. and cont the chem pe too. i know both contradict because in one need to break the collagen to grow and another builds collagen but hey....
Since I have been doing much pumping, chem pe, stretching i will throw in measurements shortly.
For best results, I think theres.... a couple of guys here so have some superb results but they had longer size.
Please Log in or Create an account to join the conversation.
Re: Astrix's PE journey (PMMA/Chem PE/extender/pump etc)
9 years 11 months ago #1293237534- astrix1981
-
Topic Author
- Offline
- General
-
- Posts: 30
- Thanks: 0
I just couldnt get a measurement on EL with photo, but roughly it measures BPEL 6 1/8 + 7/8 (space before where the reading starts as photographed and explained before) means EL without stretch NBPEL around 6-6 1/8 and with BPEL near 7.
For the Girth, MSEG before pumping was near 5 6/8 *yesterday, and after pump*today 6.
EG near base before pumping was near 6 3/8 *yesterday, and after pump *today 6 4/8 (you cant see it properly in the photo but thats what it was)
Now - for past 2 months I have been extremely irregular with the protocol but yesterday I did a session and ended up putting a bit more then normal, had a hard on pretty much all night and basically you shouldnt go to sleep but i did burpees to make it a little softer and I felt it was going down. but yeah it did stay groggy semi hard softer sort of even until morning.
I didnt pump yesterday and I pumped today. Also to add one thing that i feel maybe helping is Ive started TRT about 3 weeks ago, currently at 125 mg/wk of test enanthate. I think its giving a boost for sure to fullness of the Dick above and beyond the protocol
And when I say EG.... its the most Erect I managed to get a shot with.... hard AF to keep hard and manage the camera and get the photo right and put the measurement on.... I tried my best. Maybe if I was fully hard i could steal a 1/8 or 2 more. who knows. this is all for now!
Oh yes, I am going for second PMMA session booked for Sept 13.
Please Log in or Create an account to join the conversation.
Re: Astrix's PE journey (PMMA/Chem PE/extender/pump etc)
9 years 10 months ago #1293398996- astrix1981
-
Topic Author
- Offline
- General
-
- Posts: 30
- Thanks: 0
Did my 2nd round of PMMA today. Gotta go through the whole process again of post op care. Dr C put 14cc of 30% and 7 cc of 10% Lineasafe.
I like both of the above doctors! both are professionals and experts in their own areas. Dr. C and Wade were very happy with my results from round 1, said one of the best through post op care massage/stretch/pump etc. Lets see what the results are of second round.
Please Log in or Create an account to join the conversation.
Re: Astrix's PE journey (PMMA/Chem PE/extender/pump etc)
9 years 10 months ago #1293405051- astrix1981
-
Topic Author
- Offline
- General
-
- Posts: 30
- Thanks: 0
I think in the other case when I spoke to Wade yesterday another guy who had done Dr. Adams chem pe gained 1" in 1 year.
For me I dont care, I think Dr Adam's protocol helps with penile health in general. I just got 2nd round of PMMA done with lineasafe 14cc 30% and 7cc 10% yesterday. Im going to wait this out to settle down over next few weeks and will start pumping slowly again and Dr Adams protocol.
Dr. Adam's protocol is covered by my insurance and Im also getting Test replacement therapy with him plus I think he is a unique and fantastic doctor so Im sticking with him on not only Chem PE but overall as my health doctor too.
0.5" in length with little or no stretching, and i guess in Girth there were gains too cause I went from maybe max 6.0 to 6.3" after pump and without pump I think from 5.5 to 5.8-6.0 Girth is defo interesting.
I said on my page that Dr. Adams protocol requires patience and its more health oriented, PMMA is the fast fix for Girth.
So Im going to continue for a few years at least maybe forever.
Please Log in or Create an account to join the conversation.
Re: Astrix's PE journey (PMMA/Chem PE/extender/pump etc)
9 years 10 months ago #1293407078Please Log in or Create an account to join the conversation.
Re: Astrix's PE journey (PMMA/Chem PE/extender/pump etc)
9 years 10 months ago #1293407958- astrix1981
-
Topic Author
- Offline
- General
-
- Posts: 30
- Thanks: 0
PMMA Round 2 has been very easy I must say. Limited swelling. Operation was bearable specially since I think Ive gotten use to sticking needles in my Dick. Im hoping it eventually settles down well and gives me gains. If it is like last time I should be around 7.0" Girth. Told the doc I want 7+ ideally Im thinking 7.5-8.
Please Log in or Create an account to join the conversation.
Re: Astrix's PE journey (PMMA/Chem PE/extender/pump etc)
9 years 10 months ago #1293415999Please Log in or Create an account to join the conversation.
Re: Astrix's PE journey (PMMA/Chem PE/extender/pump etc)
9 years 10 months ago #1293418036- astrix1981
-
Topic Author
- Offline
- General
-
- Posts: 30
- Thanks: 0
I must say second round has been like almost zero pain and the PMMA lineasafe is already almost settled in and its 48 hours since op. The new trainee Ian was so impressed with the fast healing that he took extra set of photos today cause he said that he wanted to have good post op photos however all penises looked so unpresentable that he didnt have any good success stories to show much.
Now the question is size wise where does the second round take me to, and I can say right now its pretty girthy, when they measured yesterday i was 12.5 cm non Erect (4'9) pre op and 13.7cm (5'4) non Erect post op. If pre-op 4'9 grows to above 6'0 fully Erect and if I maintain the same standard Im hoping ill be near 6'5 + fully Erect or more ideally. I have touched 6'3 with pumping fully Erect so I hope I can come near 6'8-7'0 after pumping and stretching in a few days time. Anyway - anything near 7 will be satisfactory for this round.
I am determined to go for at least one or two more around and cross 7'5 Erect Girth without pump. What that monsterosity will look like... well if people want to pay to see Ill setup an online pay-per-show site to recover all the associated expeditures lol
Please Log in or Create an account to join the conversation.
Re: Astrix's PE journey (PMMA/Chem PE/extender/pump etc)
9 years 10 months ago #1293440003- astrix1981
-
Topic Author
- Offline
- General
-
- Posts: 30
- Thanks: 0
About size: Honestly I think once I crossed 6 I knew immediately that it wasnt enough. So far my penis looks good with 6+ and I think it can easily handle 7. Once I touch 7 ill know how much further Im going with this. But as of now Im committed to 7.5+ ideally without pumping. But time will tell. Ive got at least one more round in me.
The Chem Pe hopefully continues to give me gains ideally another 1-2 inc would be amazing. Im committed to both chem pe and PMMA (1-2 more rounds), will space each PMMA round by 6 months. so within next two years I hope to have the final product.
Please Log in or Create an account to join the conversation.
Re: Astrix's PE journey (PMMA/Chem PE/extender/pump etc)
9 years 10 months ago #1293568884- astrix1981
-
Topic Author
- Offline
- General
-
- Posts: 30
- Thanks: 0
moral of the story - PMMA can be real messed up if you get it wrong. i was looking at posts of PMMA lumps and people get kenlog shots and surgeries to remove em. man this isnt an easy riskless game. it can f up your Dick. i hope i havent messed up mine but so far i fell im on the right track. i also felt some PMMA move today aside from massaging dwon the lumps which have become much smoother as long as i dont let the penis retract. with the way the penis feels it looks as if the PMMA still hasnt settled down, its still very rubbery if that has any meaning. when it gets Erect its solid, almost getting to the point that i cant hold it with fingers touching but isnt there yet, i certainly if i manage to get this round right want to continue with two more rounds and get thicker than my grip.
i just want it to be thick and painful. i want to enjoy the look of fear and hear the screams of pain. before i get too far, need to fix this lumpiness. keeping fingers crossed.
Please Log in or Create an account to join the conversation.
Re: Astrix's PE journey (PMMA/Chem PE/extender/pump etc)
9 years 10 months ago #1293575639- astrix1981
-
Topic Author
- Offline
- General
-
- Posts: 30
- Thanks: 0
But Im really glad i took corrective action when i did, almost 20 days out of the surgery because had i not and had this settled like this it would have been a real spoiler to the positive first round. I think i may just come on top with success this round too.
with the x30 hydromax my penis is maxing on it, i ordered x50 extreme cost around 400$ CAD and is on its way, this is the max size they have with Girth 9 Inch so im looking forward to what i can pump out with that.
i havent started the chem pe yet, i want PMMA to settle down real good then ill get to that cause theres are lot of Jelqing and jerking with that for about an hour every other day.
So far im happy with round 2, and in six months ready for round 3! I know now for sure i want my FG at 6+ and EG around 7.5+
Please Log in or Create an account to join the conversation.
Re: Astrix's PE journey (PMMA/Chem PE/extender/pump etc)
9 years 10 months ago #1293585053- astrix1981
-
Topic Author
- Offline
- General
-
- Posts: 30
- Thanks: 0
either my Balls have become smaller or my penis has become bigger hehe
Please Log in or Create an account to join the conversation.