TOPIC: Penis-Pumping Thread
Penis-Pumping Thread
2 years 11 months ago #1308713547So i researched a bit and wanna start a general thread for all penis-pumping questions and experiences.
My Pumping plan:
- conservative viewpoint: start pumping only 3-6 months after the procedure -> for me 3months after last procedure is 19.6, start superlow at 19.9
- twice a day, 5minutes each
- only 5hg
- i guess measure every Sunday right after the pump (to see to how much girth extends; goal after warming up for first month is to be temporary slightly girthier than my normal erect)
My pump has 4 settings
100 millibar = 0.1 bar = 100 kPa kilopascal, 200 millibar, 300 millibar, 400 millibar
It’s an electric one that automatically holds the pressure at this level, which is super-neat
So, what is millibars to hg?
100 millibar = 2.95 hg
200 millibar = 5.9 hg
So, i’ll stay mostly at 100 millibar and temporarily go to 200 millibar
Heat is recommended, but seems much more effort.
(edit: perhaps i buy this one to put around penis pump while use.. but then i don’t see the penis, but i guess i don’t have to see my penis.. totalmanshop.com/products/infrared-heat-pad )
Warning signs of too much pressure: bruising, discoloration, ‚Donut‘ under glans
Be careful about any changes in penis
Possible problems: i don’t get hard easily and i don’t wanna get into watching porn, i guess i will have to do it limp, which surely is not ideal but well
Starting slow 19.9: 100 millibar only, start with 1minute daily raise it every 3rd day to 1min longer, till 5min; then go to twice daily 3min and do the same till 5min, then see (eg go 200millibar in last minute)
Forum search for ‚pump‘ looked at first 10 pages, and also looked at first 11 pages in search of ‚pump‘ just in the title:
6x5to6x7
If I had to do it again, I would have been more consistent with my pumping. I only got 15cc's due to tight skin. They said if I want another full round or even touch ups, then I need to wait 6-12 months and pump every day, twice a day, 5 minutes each session for a minimum of 30 days prior to the next procedure. That's the only way to get the skin to grow and be more elastic to accommodate more filler.
-> Jackpot! Gold-Information from 6x5to6x7. But his next round will be in 5 months soonest, so results will be only seen there.
phalloboards.info/forum/progress-reports...?start=15#1308711771
6x5to6x7
I tried pumping at day 30. I pumped at 10 kPa for 5 minutes, saw no results and my dick turned purple. Scared me a bit. Sooooo, I waited another month and tried again last night. That was a much better experience. I did a light test again at first, saw no results but also saw no color change or sensitivity.
-> even more gold from 6x5to6x7. So after reading that i wanna wait 2 or 3 months before starting to pump.
Skeptical_One: Pre-pumping may help make your skin more compliant for the procedure but that's a BIG "may," and more speculative on my part
phalloboards.info/forum/progress-reports...?start=30#1308711295
NewMember: EG 6 inches. Pumped to 6.25 normally. I hit 6.5 this time, a new record. I pumped medium pressure for 5x 2 min intervals too. Guess I'll keep up the low pressure gradual routine until I can hit 6.75 or 7 (if even possible) before I consider Round 3.
phalloboards.info/forum/progress-reports...start=135#1308704600
greygrey
I still completely want a full round 4. My biggest limitation is how tight my skin is below my mid-shaft, so I’m going to do as much pumping as I can to loosen that area up before my next round.
phalloboards.info/forum/progress-reports...date.html#1308704276
Hyperbol
I’m convinced there’s something going on immediately after treatment where it doesn’t matter what you do but your gains are pretty much set in forecast. In theory, that amount of carrier gel in rd 2 should have produced an immediate result greater than rd1 because the lift from the gel has nothing to do with collagen. That’s one of Sinclair’s selling points is that the gel gives instant lift and the collagen replaces it over the course of 3-4 months putting you at the same gain you started with. However, I noticed night two after my procedure that my erect girth was less than night two on my first trip. Even though I was less swollen I was only measuring 6.35. So I was measuring about a .7 inch gain, what I wanted to end up with after healing, while still being swollen a day after the procedure. I knew at that point I wasn't going to come close to the expected gain. It’s my belief that your dick can only hold so much. The collagen also needs rooms to grow but again, where was the gel after rd2? In rd3 I started oozing product out of entry points when I didn’t ooze product in the first two rounds. I’m going to try and start pumping in an attempt to loosen skin.
How to pump?
phalloboards.info/forum/progress-reports...haft.html#1308711325
Yoshinator:
Big secret is to pump under light pressure. No more than 5hg to 7hg and even 7 should be done for a short time before returning to 5. You can pump longer that way. Pumping under too high a pressure can causing bruising and discoloration even if for a small amount of time, it could be seconds. Wait a few weeks for the discoloration to go away before starting again and try the low pressure for longer and see how it works out for you.
6x5to6x7:
I decided to try my old regime which is dialed into my digital pump. It's 2 rounds of 20 minutes at 5 minute intervals of 20 kPa with 1 min breaks in between. It's quasi-aggressive, but the only way I actually move the needle on size for a night of fun with the wife.
phalloboards.info/forum/progress-reports...erma.html#1308710995
All_there_is
I had not pumped for the week before my procedure as per Ian. Then waited 6 weeks. Bought a new automatic pump. The first setting was 10. That was way to strong. Hence the very bad reaction. I waited another 2 weeks post that negative side effect. Then I took my old hand pump and did it on very low pressure. No more than 5. I had no reaction whatsoever. It was too much pressure and after a long hiatus from pumping.
Ian told me the same thing not to pump for at least 30 days. I waited a bit longer to the 6 week mark. Then over pumped and he told me to wait another 2 weeks before I tried it again. It is like most other aspects of this penis enlargement journey we are all on here…. Slow and steady. Not a race but a marathon as they say.
I sent an e mail to Ian of Avanti Derma yesterday. He replied back that in terms of pumping it should be done at lower pressure. He said to make your penis slightly bigger than when erect naturally. Do not pump for more than 10 minutes. You can do this once per day. Their philosophy regarding pumping is twofold: one circulation and two if you are planning more pmma injections it helps to stretch the skin. He was very clear that the pumping needs to be only strong enough to stretch the skin…. NOT to damage the implant, your veins or the skin itself.
phalloboards.info/forum/manual-pe-exerci...?start=15#1308701289
phrogfixer
Can pumping allow you to stretch a bit more to add an extra CC or two for maximum gains? What I do know is that I've been pumping for a year now and my skin is stretched a bit. I'm circumcised and that extra skin is now looking like I'm also getting a bit of a hood covering my head. I think a lot of pumping over a few months could give you room to add a bit more PMMA or filler of choosing. Is like to know if anybody pumped for a while before going to get an implant. Is like to know if he felt he was able to get more CCs added as a result of stretching.
phalloboards.info/forum/progress-reports...enis.html#1308700004
Brother69
Then, around the 4th day, I had a date with my girlfriend and I used my penis pump before hand. Then I pumped up again the next morning and then again about a day later. I also used cock rings several times during these days which might have been like day 4 thru day 8 after my 3rd round.
Well at this point, i'm about 2 weeks or more out past the 3rd round and I think the Pumping and use of Cock Rings so soon after my injections may have caused some of the PMMA to migrate and pool at one side of the base of my penis where the flesh is usually sucked up in to the cylinder to make it air tight when pumping. There is a very noticeable lump of product there that I am trying to press back flat whenever I can. Also, I think the vacuum may have caused some of the PMMA to pull back along the incompletely healed injection tunnels towards my glans as I can feel some hard spikes there that weren't there before.
phalloboards.info/forum/manual-pe-exerci...swag.html#1308710855
Dr_Shafer
Many patients ask about pumping before and after the SWAG procedure. Pumping can be good prior to the procedure, but we recommend stopping at least one week prior to your injections. After the injections, we recommend waiting at least 6-8 weeks before pumping and to keep the device on low settings. High negative pressure vacuum pumping has the potential to distort the filler and cause excess swelling.
phalloboards.info/forum/general-discussi...?start=30#1308709809
Androfill:
Please don't use a Bathmate or any other pumps for at least 4 weeks after HA and 12 weeks after Ellanse. This will likely cause the filler to migrate.
Even after 4 weeks, HA can shift with excessive pumping.
phalloboards.info/forum/general-phallopl...pmma.html#1303531601
indiano123
I had this crazy idea, and I decided to try it out. I used colt stay hard cream as lube, and then I pumped for 15 mins. Once I'm done I put on 3 silicone cock rings to trap the blood.
Brock
I wouldn't do it- because I did, and the result *seemingly* was the PMMA getting pulled from base to midshaft due to pressure.
When I pumped after round one, it was right after in the healing phase. From what I saw, I did move the product from the pressure- maybe I pumped too hard.
If I was a gambling man, I would say after 6 mo or so, when all the blood vessels can be seen created through the implant you would be ok for pumping. Someone who is a hard core pumper with multiple rounds would have a better idea. I threw my pump away after 2 weeks.
phalloboards.info/forum/general-discussi...t-ha.html#1308709568
Agent5: this is about hyaluronic acid, which is different
Wanted to give an update. I would no longer recommend pumping after HA. One of the reasons given for why we get longer life of the product than other injection sites is the lack of lymphatic fluid in the penis versus say the face. Pumping greatly increases the amount of fluid moving through the tissue and I feel accelerates product loss.
phalloboards.info/forum/progress-reports...w-up.html#1308707785
Sokdu123
I can't emphasize enough the use of the heating pad wrapped around the tube. The heat really makes a difference!
phalloboards.info/forum/manual-pe-exerci...?start=15#1308703280
Texas
just some randoms:
I prefer air pumps to water . for many reasons. control pressure more.
leluvs are the best for the money. but the stickers will come off. etched cylinders are more expensive.
use lube in air pumps. and heat.
be sure to build up to your time GO SLOW.
sizing you pump could be challenging , read a lot.
Brazenkane:
This is BY FAR the best pump and easiest to use.
zenhanger.com/products/zen-pump-electronic-automatic-penis-pump
It has a digital readout. the base is VERY comfortable and you can forget any accidental scrotal incidentents because the base (pat. pending - so they say) is this very comfy gel thing. There's also a clock on the digi readout which is very handy
Most important it's EFFECTIVE AND MOST COMFY pump I've ever used
New1inch:
I recommend leluv since you can adjust pressure and it comes with the ruler on it to track your progress
With the leluv tube and hand pump I can control exactly the pressure I need.
Noxcuse:
You need to shave or at least trim really well. Use a lube also to help it seal. Don't get too much on your scrotum or you will have a better risk of it getting sucked inside.
phalloboards.info/forum/general-discussi...king.html#1308704667
Voltz
I went down the pumping rabbit hole from 2013- 2017. I without a doubt lost sensation due to it along with EQ. It wasn't until I found Thunders place and researched injuries that I realized I was doing things wrong. Never the less I feel I lost approx 30% - 40% of sensation.
Too much pressure and incorrect technique. Didn't know how pertinent it was to take a break and heal after experiencing certain negative effects of pumping. I also pumped a minimum of 6 X's a week which doesn't give your Johnson enough time to recover even if you're using the correct technique / pressure
Please Log in or Create an account to join the conversation.
Re: Penis-Pumping Thread
2 years 11 months ago #1308713553What brand pump are you using?
I’m thinking about this one shown in the video but I need to see if the chamber can handle my Girth. However. I’m more looking at pumping for length.
Please Log in or Create an account to join the conversation.
Re: Penis-Pumping Thread
2 years 11 months ago #1308713554I use this no-name pump that seems super-simillar to the one in your video:
www.eis.at/p/penispumpe-mit-3-manschetten-32-5-cm-027767to
I had former pumps (many years ago, LA pump, Bathmate) and compared to these i love:
- The rubber seal! It seals off 100%, and super easy! I remember shaving and shit with other pumps (eg LA Pump, also bathmate) and pressing it in the body, always struggling/worrying to get some kind of seal - with this rubber thing it just seals off supergood with no effort. I see the one in the video has it also to. This pump i bought had 2 of these rubber-things, one with smaller hole and one with bigger hole, which is nice cause the smaller one i think is tighter than i would want
- the electrics - i have these 4 modes, and when i turn one on, he automatically kinda keeps it at that pressure level.. - now, the one in the video looks far better here, having even different modes - i am curious how beneficial these 'intervall training modes' are, guess that's hard to tell
- no water (i don't like sitting in my shower being wet fiddling with all this stuff, also no gauge at the bathmate seems so ridiculous, you don't even know what pressure you are..)
Please Log in or Create an account to join the conversation.
Re: Penis-Pumping Thread
2 years 11 months ago #1308713555I do like water pumps a lot however, I do 100% agree that the bathmates lack of gage is total crap. That’s a massive oversight.
LA pump has some really interesting models that I think would be fun ti experiment with. Example- a full Cock and Balls pump or mushroom head pump.
Please Log in or Create an account to join the conversation.
Re: Penis-Pumping Thread
2 years 11 months ago #1308713611Here’s a really nice pump for those looking to incorporate cock and ball pumping together. This sight also has normal shaft cylinders with gage pumps to accurately measure the pressure. Just another resource.
Please Log in or Create an account to join the conversation.
Re: Penis-Pumping Thread
2 years 11 months ago #1308713612That picture on that link with that super-big pumped-up balls
I thought first 'why the hell would you pump your balls..' - and now i am thinking 'hmm, having bigger balls sounds cool)
I guess with balls it's 100% only temporary (?)
(while with penis pumps people believe they can get long term gains with that i guess)
'The results in one hour are similar to 2-3 hrs prior in flared cylinder and/or Monster Tube.' - omg, 1 hour of pumping? That doesn't sound nice)
Please Log in or Create an account to join the conversation.
Re: Penis-Pumping Thread
2 years 11 months ago #1308713614Please Log in or Create an account to join the conversation.
Re: Penis-Pumping Thread
2 years 11 months ago #1308713615(but bigger Balls sound nice, but don't think i'll do something about it)
Please Log in or Create an account to join the conversation.
Re: Penis-Pumping Thread
2 years 11 months ago #1308713616I like this chamber idea. Might be fun and mix up the pumping routine. However. I think it’s easy to say that the most effective pumping chambers are single cylinders for shaft only.
I do bounce between pumping for length or Girth. Ultimately I think for me length needs to be prioritized since I’ll be pumping in conjunction with the LG custom fit Hanger I’m going to order once I’m done healing from my latest procedure.
Please Log in or Create an account to join the conversation.
Re: Penis-Pumping Thread
2 years 11 months ago #1308713695either way this is by far the best pump i ever owned.
Please Log in or Create an account to join the conversation.
Re: Penis-Pumping Thread
2 years 11 months ago #1308713696Please Log in or Create an account to join the conversation.
Re: Penis-Pumping Thread
2 years 11 months ago #1308713707Please Log in or Create an account to join the conversation.
Re: Penis-Pumping Thread
2 years 11 months ago #1308713720I have their new auto pump now. I love it. So, until it breaks, ill keep on going with it.
@Dream Heat is awesome on the pumps. But the total man heater is weak to me. I have it. Pic if you want proof, lol. I bought am infrared heater wrap, made for an arm and I wrap it around the pump and velcro. Sometimes I use rubber bands as well. its a pain in the ass sometimes. btu its worth it and you get used to it.
Keep us posted my man, and good luck.
Please Log in or Create an account to join the conversation.
Re: Penis-Pumping Thread
2 years 11 months ago #1308713723Do you know where you bought it, would appreciate a link! (i looked at my local german amazon and didn't find something, feel out of luck
edit: here a link to one that is supposedly good on amazon com: www.amazon.com/gp/product/B07YJGL4S1/ref...00_s01?ie=UTF8&psc=1
But currently unavailable.. and i would need something from my local amazon.de
Please Log in or Create an account to join the conversation.
Re: Penis-Pumping Thread
2 years 11 months ago #1308713724Dream wrote: Cool! So this infrared heater wrap was much more powerful than the total man heater, thats very useful information to me, Thanks!
Do you know where you bought it, would appreciate a link! (i looked at my local german amazon and didn't find something, feel out of luck)
Please Log in or Create an account to join the conversation.