TOPIC: Avanti PMMA Round 1 - 2/18/26
Re: Avanti PMMA Round 1 - 2/18/26
5 months 1 week ago #1308724422Please Log in or Create an account to join the conversation.
Re: Avanti PMMA Round 1 - 2/18/26
5 months 1 week ago #1308724423Please Log in or Create an account to join the conversation.
Re: Avanti PMMA Round 1 - 2/18/26
5 months 1 week ago #1308724424moes wrote: I had the same problem as you, but it has been largely resolved. However, when the swelling went down, I realized that there was a leak and that filler had accumulated at the base under the penis. The result is a lump the size of a kidney bean, which is clearly PMMA, and I will probably have to have it surgically removed. But it's tolerable, and it's a risk associated with this procedure that you don't often hear about.
This is my fear. The area of hardness on the underside of my base is wayyyy bigger than a kidney bean though. If it was bean sized I wouldn't be so freaked out. This goes around the entire underside half of my shaft. It's very firm, and it does not appear to be attached to the shaft underneath. It curves out away from the shaft. Dr. C says it will go away as the swelling fades but I don't see how. I can feel the difference between areas that are swollen with lymphatic fluid and this monster. It feels like a strip of Centimeter thick rubber is wrapped around my base. I can press it down onto the internal shaft surface with my fingers and it lays flat for a minute, but the moment my Dick hangs down again the rubber strip folds in half at the crease where my shaft meets my scrotum. As soon as I raise my Dick up, the strip of rubber is standing sharply at attention again.
Having a hard time thinking of anything right now except how awful this looks and feels.
Please Log in or Create an account to join the conversation.
Re: Avanti PMMA Round 1 - 2/18/26
5 months 1 week ago #1308724426But yeah just continue to massage like Ian showed you. Document any problem areas and on your next appointment they can address it. I had a large Nodule on the top of my shaft from my first procedure. I thought it would go away if I added more filler, but I needed to get a Kenalog injection to break it up.
If you look though people threads you'll see some people have minor imperfections that they go back and get fixed. Each time you go back they can only fit less and less filler because of scar tissue and less space so that they can focus on correcting any problem areas instead. This is why they recommend you pump to add more room, because there are some people that want as much filler as they can get which can some times result in the entry points taking some time to close.
Like most people try to build mass first then go for minor touchups later*
Please Log in or Create an account to join the conversation.
Re: Avanti PMMA Round 1 - 2/18/26
5 months 1 week ago #1308724427Please Log in or Create an account to join the conversation.
Re: Avanti PMMA Round 1 - 2/18/26
5 months 1 week ago #1308724430Please Log in or Create an account to join the conversation.
Re: Avanti PMMA Round 1 - 2/18/26
5 months 1 week ago #1308724431Toothman wrote: Having been there before, this is edema. It can make spots look like this, temporarily. I predict 1 mos it will look better, 3 mos it will be gone. Massage
My brother in Christ, if you’re right I’ll jump through the internet and kiss you. I just have a hard time believing a hard rubbery band as thick as a drinking straw and wrapped around the underside of my base could possibly be fluid buildup/edema. Dr. C said at this point to press firmly with fingers into the meatiest part of the mass for four mins, four times a day. I’ll do that but it doesn’t seem to do anything.
Please Log in or Create an account to join the conversation.
Re: Avanti PMMA Round 1 - 2/18/26
5 months 1 week ago #1308724432lurkin wrote: I had this too. It was addressed on my last session. Basically every session they can correct things like maybe one side is uneven or there is a low spot. I mention this in my thread but yeah I had a spot that flared out in the base.
But yeah just continue to massage like Ian showed you. Document any problem areas and on your next appointment they can address it. I had a large Nodule on the top of my shaft from my first procedure. I thought it would go away if I added more filler, but I needed to get a Kenalog injection to break it up.
If you look though people threads you'll see some people have minor imperfections that they go back and get fixed. Each time you go back they can only fit less and less filler because of scar tissue and less space so that they can focus on correcting any problem areas instead. This is why they recommend you pump to add more room, because there are some people that want as much filler as they can get which can some times result in the entry points taking some time to close.
Like most people try to build mass first then go for minor touchups later*
I can’t see how something this big is fixable. It’s not a spot. It’s as thick as a pencil, probably two inches long, wrapped around the underside of the base where the base meets the scrotum. Adding filler around it could make it a smoother curve instead the inner tube it is now but my Dick will be totally cone shaped.
Please Log in or Create an account to join the conversation.
Re: Avanti PMMA Round 1 - 2/18/26
5 months 1 week ago #1308724433BigGym wrote: I had the same thing after the first round and I’ll give it to you straight it’s likely not going to go away. But it’s also not the end of the world. I was every bit as freaked out as you are but I can assure you it’s not as bad as you think it is. I went for a second round and it hides it a little better but if I pull up like that you can still see it. It’s one aspect of these procedures that people need to understand is that once you decide to do something like this your original penis is gone and that’s part of the deal you’re making. I don’t mean that to lecture you just that it will be okay. I was kind of depressed about the imperfections after the first round but I doubled down and went back for more and I’m glad I did. Embrace your new Dick and learn to love it even if it’s not perfect.
You had Ellanse though, right? Why not have it dissolved? If I could get this tube of rubber dissolved I’d do it right now. It looks bad but feels absurd. The rest of my Dick is still very swollen with fluid but this part is a different texture entirely. It’s very firm and rubbery and it’s huge. The photos make it look like a lump but it feels like a 2 or 3” long piece of rubber macaroni attached to the underside of my Dick. It’s so much thicker than the base immediately above it. I didn’t have a lot of length to begin with and this is going to reduce functional penetration even more because once this part hits a vagina or a mouth I’m not getting in any further. I will learn to live with it but this isn’t the kind of “minor imperfection” I was expecting.
Please Log in or Create an account to join the conversation.
Re: Avanti PMMA Round 1 - 2/18/26
5 months 1 week ago #1308724434just hang tight buddy. Itll be fine
Please Log in or Create an account to join the conversation.
Re: Avanti PMMA Round 1 - 2/18/26
5 months 1 week ago #1308724436- Alittlebigger
-
- Offline
- Pending Email Verification
-
- Posts: 224
- Thanks: 20
Please Log in or Create an account to join the conversation.
Re: Avanti PMMA Round 1 - 2/18/26
5 months 1 week ago #1308724437Please Log in or Create an account to join the conversation.
Re: Avanti PMMA Round 1 - 2/18/26
5 months 1 week ago #1308724438Gh847 wrote:moes wrote: I had the same problem as you, but it has been largely resolved. However, when the swelling went down, I realized that there was a leak and that filler had accumulated at the base under the penis. The result is a lump the size of a kidney bean, which is clearly PMMA, and I will probably have to have it surgically removed. But it's tolerable, and it's a risk associated with this procedure that you don't often hear about.
This is my fear. The area of hardness on the underside of my base is wayyyy bigger than a kidney bean though. If it was bean sized I wouldn't be so freaked out. This goes around the entire underside half of my shaft. It's very firm, and it does not appear to be attached to the shaft underneath. It curves out away from the shaft. Dr. C says it will go away as the swelling fades but I don't see how. I can feel the difference between areas that are swollen with lymphatic fluid and this monster. It feels like a strip of Centimeter thick rubber is wrapped around my base. I can press it down onto the internal shaft surface with my fingers and it lays flat for a minute, but the moment my Dick hangs down again the rubber strip folds in half at the crease where my shaft meets my scrotum. As soon as I raise my Dick up, the strip of rubber is standing sharply at attention again.
Having a hard time thinking of anything right now except how awful this looks and feels.
Let me add something important: it's far too early to jump to any conclusions at this point. I learned this the hard way after going to AD. The swelling I had, which was similar to yours, decreased significantly over time (over several months!) to eventually reach the size of a kidney bean. So at this stage, anything is possible, and the only thing that can help you is to follow Dr. C's instructions and find a way to distract your mind. You could also make a deal with yourself, like, “OK, no final conclusions for three months.” And even after three months, there are still positive changes that can happen.
Please Log in or Create an account to join the conversation.
Re: Avanti PMMA Round 1 - 2/18/26
5 months 1 week ago #1308724442Please Log in or Create an account to join the conversation.
Re: Avanti PMMA Round 1 - 2/18/26
5 months 1 week ago #1308724443Please Log in or Create an account to join the conversation.