TOPIC: PMMA in Uncut patients/tight foreskin with Pics...help?

naginati wrote: She told me she had done over 200 penile Girth enhancements with PMMA. Now it more like 20. Dr's lie like fuck

I think it's a language issue. We know she's done more than 20 PE's just from people who post here. You've got to keep in mind we have about 6 times as many viewers of the forum as we do actual members, so it's reasonable to assume she'd have done at least 100 procedures just as a result of PB's. That's being very conservative.

Skin was already stretchy so it filled it up. Looks much better. Your skin will stretch I suppose if it's not already loose. Not a problem. Nothing above the ring but right up to it. Don't think it would be possible or wise to do so. Pics will come when I'm ready after round 2. Strongly advise you to wait till HA is gone. Been thinking, I can't help but think it would cause problems. Waiting a few months us nothing if it gives you a decentr permanent result.

We have almost identical stats. Fist time I've seen that.

Dr N told me she only puts the PMMA within one inch of the glans. This is to stop lumps forming when your foteskin retracts when erect.

I initially had a problem that a lump formed when my foreskin retracted when erect. It has gone down a lot since my procedure in January but is still noticeable if I pull the foreskin down the shaft.

I would advice you to go slowly if you are getting PMMA. First round go with 10% of 10 ml and make a more informed decision on how you think it is going. The huge difference between HA and PMMA is that PMMA is pernament. So if a result happens you're not happy about it is much harder to correct.

Dr C has a video on utube explaining why uncut guys can't get as much and the higher risks they have with the procedure.

phalloboards.websitetoolbox.com/post/ava...video&pid=1295103424

Btw my bad reaction around the foreskin in R1 is why I won't be getting any more. I have lose foreskin that retracts easily and I believe more could result in pernament lumps. Not worth the risk.

Her English is terrible. She would struggle to understand. Requests have to be very basic.

In the first two pics you can see how the Foreskin stays naturally in the Erect state and how it looks when i pull it back in the Erect state (notice the pink tighter area of the Foreskin)

I see your problem. Hmm, not sure how you getvround that. 1 Inch is fsr below the glans. I have it immediately below. I wonder if pumping would stretchable skin. It did for me. I would try that first.
So how about pumping and letting the HA go, won't take long it seems, and then going for PMMA?
Booked in for the 10th June.

Thanks Southdubs and sorry for the delay I have been in Jamaica working and have been completely flat out.

I followed your progress report and wow man what a unit you had in the first place!

I'm interested in your reaction at the Foreskin you mentioned you had a lump that formed. Did any PMMA get under the Foreskin or is just when you retract it you have the issue? Also I don't suppose anyone knows how quick it is to get HA dissolved? if I wanted to go ahead with this procedure would I have to wait until the stuff they used to dissolve the HA has left the penis?

I had a response from dr N although it seemed more like a stock initial response and wasn't really personalised to me that much. She did say

"I have now applied Metacrill to 100+ patients, out of which approximately 20% stand for male genitals. Circunsicion/no circunsision has no impact on the procedure."

This worries me slightly as we all now It does have an impact. I might send her some specific photos that highlight my concerns to see if she can provide a more specific answer.

You'll have the same tight area after PMMA. I do. Have roll Foreskin back like a condom. Itvalso makes putting a condom on a bit tricky. Have to roll Foreskin forward, put condom over head and the roll it back with condom to get over the sudden ridge. Also, def wait until the HA has gone. Make sure it binds to the corpus cavernosum and not the HA!

yeah i noticed that too which is pretty cool and coincidental! I'm contemplating getting the HA dissolved but I guess I should wait until I have at least had a response from Dr N and closer to getting my first session booked in. I'm also not sure how long the process of the getting HA dissolved takes either.

I have just read your progress report man and its all very helpful. Sounds like you have gotten some decent gains and a good base to build on for future sessions. I'd be really interested in seeing how round 2 turns out for you. All the best with that, do you have it booked in yet?

In terms of the Foreskin issue i am just curious about how the aesthetic will look with PMMA in the top half of my penis. The problem i have is that the tighter area of Foreskin for me is actually about an Inch to and an Inch and a half down from the base of my glans. What I wouldnt want is there to be no gain there and then suddenly an Inch and a half down my penis it suddenly gets wider with a clear ridge. I guess I could leave the Foreskin in its natural state (tucked up tight underneath the head, see photo above) for the first couple weeks and avoid pulling it down the shaft (other photo above) to make sure the PMMA has time to settle further up the shaft. I would then worry that it would be harder to pull the Foreskin tight back down the shaft though.

also trying to change the pictures above to attached images so only members can view them. Any tips?

She told me she had done over 200 penile Girth enhancements with PMMA. Now it more like 20. Dr's lie like fuck

I have a bathmate and when i pump the skin does stretch although it then returns to its natural tight state once the pump has gone down. I feel like if PMMA was put under the tight area it would potentially stretch the skin out but the fact that it is naturally tighter than the skin around it, might cause unwanted compression over the time everything is settling in. I dont want to end up with a permanent ridge that far underneath the glands.

Maybe I can ask Dr N to apply less product here and naturally taper it down to the base. Then see how everything settles after R1. How easy was Dr N to talk to and discuss things with. Could that be easily explained to her do you think?

Hi thanks man, has your skin stretched at all with the PMMA and did you have filler injected above the tight area? I don't suppose there are any pics available of how yours looks now after PMMA?

That is a good idea and i have thought about it. May just do that.

The alpha blocker is 'Flomax' and I got it from 'Boots' online.

They phoned me up to ask questions about why i needed it. I lied and said it was for urinary problems.

Not sure if it works outside the UK though. Which I assume you are.