Search
×
Keyword
PhalloBoards - An Online Community to Discuss Penile Girth Enhancement

TOPIC: Pumps for PMMA after care

Re: Pumps for PMMA after care

13 years 3 weeks ago #1289818793
Sizemic wrote: I suppose I should chime in here... been pumping now myself for about 3 or 4 days to see if I was doing it poorly before...

I do 3 x 5min sessions (sometimes I extend a session to 10min) with a normal pump / gauge and water (similar to how purple donkey described above) I simply fill the tube about 1" above my glans with water and by the time I get to the 3rd session the water in the pump is almost entering the valve but not quite. I never pass 5hg of pressure.

Works like a charm. And so far so good with it. No extra ridges or anything showing and if anything its even made things look even better... Evened things out and made it more uniform. Though I guess the true test would be to pump for a week and then have like a week off.

I suppose I'll hold my judgement on pumping... water pumping does seem to make a bit of a difference. I don't think I'd ever use a bathmate though... I enjoy my standard pump and gauge (brake bleeder pump / gauge, Colt 2.75" Cylinder with quick release valve).

I'll keep you guys posted on if this affects my PMMA

Interesting.. Questions?
1. do you hold the pump upside down when filling in the water?
2. how do you know exactly how much to put if you can't measure it.
3. do you do this standing to not risk the water falling out?
4. when you come out between breaks do you you refill?
5. Is lube still required?
6. whats the difference you achieve when its filled with water vs just air?

I didn't even know this was possible? I may try it, if I can get the effect without having to actually use the bathmate.

Please Log in or Create an account to join the conversation.

Re: Pumps for PMMA after care

13 years 3 weeks ago #1289769659
Sigh,

Everyone is different and what works for one might not work for others... First it was a Cock ring around the base... then it was a light wrap with messaging... then it was this weird roller thing... Then a silicone sleeve... Now it's pumping....

Just saying these aftercare things have all come and gone with varying results. The key is to try things until you find what works for you.

Please Log in or Create an account to join the conversation.

Re: Pumps for PMMA after care

13 years 3 weeks ago #1289778368
Tell us how it go

Please Log in or Create an account to join the conversation.

Re: Pumps for PMMA after care

13 years 3 weeks ago #1278781121
Yeah that sleeve link someone posted looked really good - might even help regular PE since you cant leave most ADSs on at night (I'd assume you could leave the sleeve on at night).

Does anyone have the sleeve link? I am looking but haven't found it yet.

Edit, just found it! www.stealthformen.com/

Please Log in or Create an account to join the conversation.

Re: Pumps for PMMA after care

13 years 3 weeks ago #1289778626
Wade told me that i could pump after a month.

Please Log in or Create an account to join the conversation.

Re: Pumps for PMMA after care

13 years 3 weeks ago #1278781381
The inside of your penis is healing during the first week after a procedure. Just because the entry holes close up doesnt mean the channels that Dr. C has created with the cannula carving around under the skin have healed. IMHO pumping in the first week after is a bad idea.

Please Log in or Create an account to join the conversation.

Re: Pumps for PMMA after care

13 years 3 weeks ago #1289844423
Wow, a .25" decrease? That's pretty significant

Please Log in or Create an account to join the conversation.

Re: Pumps for PMMA after care

13 years 3 weeks ago #1278777801
That's where wrapping, or a good sleeve comes in. Can't be in a pump for three days either, and a good wrap job can get you extented to near your EL.

Please Log in or Create an account to join the conversation.

Re: Pumps for PMMA after care

13 years 3 weeks ago #1289819349
I always hated the Bathmate too. I've had two that just flat out stopped working on me. Have no idea why. Also the water thing is a huge pain in the ass.

Please Log in or Create an account to join the conversation.

Re: Pumps for PMMA after care

13 years 3 weeks ago #1289778137
My X40 seems to be of exceptional quality. I have no desire to gain size; simply to exercise the penis and maintain postoperative results. I still exhibit great aesthetics at 16 days post touch up. I've been using the X40 for 8 days.

Please Log in or Create an account to join the conversation.

Re: Pumps for PMMA after care

13 years 3 weeks ago #1278716894
Pumping puts a lot of pressure on the area right beneath the glands, you often get fluid built up there. This is the area that you usually have lots of swelling post procedure also, so it could be very uncomfortable. I think I did pump a bit with very low pressure after R1, but nothing consistent

Please Log in or Create an account to join the conversation.

Re: Pumps for PMMA after care

13 years 3 weeks ago #1289771488
I'm using the X40. I will keep everyone updated. I barely fit in the thing though.

Please Log in or Create an account to join the conversation.

Re: Pumps for PMMA after care

13 years 3 weeks ago #1278775272
I think it would lead to the product clumping due to the pressure that draws your penis to the top, like it would migrate to thr circ area.... of course I could be wrong and I wouldn't suggest anyone trying it for post care.

Please Log in or Create an account to join the conversation.

Re: Pumps for PMMA after care

13 years 3 weeks ago #1289816809
I suppose I should chime in here... been pumping now myself for about 3 or 4 days to see if I was doing it poorly before...

I do 3 x 5min sessions (sometimes I extend a session to 10min) with a normal pump / gauge and water (similar to how purple donkey described above) I simply fill the tube about 1" above my glans with water and by the time I get to the 3rd session the water in the pump is almost entering the valve but not quite. I never pass 5hg of pressure.

Works like a charm. And so far so good with it. No extra ridges or anything showing and if anything its even made things look even better... Evened things out and made it more uniform. Though I guess the true test would be to pump for a week and then have like a week off.

I suppose I'll hold my judgement on pumping... water pumping does seem to make a bit of a difference. I don't think I'd ever use a bathmate though... I enjoy my standard pump and gauge (brake bleeder pump / gauge, Colt 2.75" Cylinder with quick release valve).

I'll keep you guys posted on if this affects my PMMA

Please Log in or Create an account to join the conversation.

Re: Pumps for PMMA after care

13 years 3 weeks ago #1289771768
Sizemic and I had negative results with pumping ""AFTER" PMMA had formed (right Sizemic?). So, If wade says pumping is a good idea after PMMA injection and "WHILE" collagen is forming, then we will have to wait and see the results.

This PMMA thing, while has fairly stable results so far, is still going through learning curve. May be in 6-8 years we will have more solid data...Time will tell.

Please Log in or Create an account to join the conversation.