TOPIC: JLMB's PMMA Thread
Re: JLMB's PMMA Thread
13 years 10 months ago #1274996915On the plus side my aesthetics have definitely increased and all the irregularities have diminished, and I still have a great Flaccid size for show-off.
Please Log in or Create an account to join the conversation.
Re: JLMB's PMMA Thread
13 years 9 months ago #1275567312*photo temp removed*
Please Log in or Create an account to join the conversation.
Re: JLMB's PMMA Thread
13 years 9 months ago #1275571027- Skeptical_One
-
- Offline
- General
-
- Posts: 4979
- Thanks: 613
jlmb wrote: This is a comparison of my Flaccid, pre and post R1 three months. My increase is still hovering around .75" and I love my Flaccid difference.
The other night I went to a mountain spa, it ended up being a popular night with about 30+ guys in the mens pools, it was pretty cramped but nothing like an ego boost to walk in and see every guy staring at your Cock. Then again, I was the only foreigner and this is Asia.
Wow that's a great Flaccid, you seem to be a true show-er. No matter how much PMMA I get, I'll never "hang" like that . Asia or not, that's truly big! May I ask how tall you are? That also puts the size in perspective.
Please Log in or Create an account to join the conversation.
Re: JLMB's PMMA Thread
13 years 9 months ago #1275578442Re: JLMB's PMMA Thread
13 years 8 months ago #1275686620BPEL - 19cm (7.5in)
BPFSL - 20cm (7.87in)
EL - 17.75cm (7in)
MSFG - 13cm (5.11)
MSEG - 14.5cm (5.7in)
BEG - 18cm (7.08in)
I'm not super hard in the Girth measurement pics, but I was at the stage where I got most of size increase of being hard and just not the point part, haha. My length measurements are a bit down still from before, but I think if I ever get my extender or start Hanging again the small difference should return. One thing I've noticed is that my BPFSL has remained the same as pre-op which was after I had been Hanging nicely for three months, I had expected it to decrease, so thats interesting but I don't really know what it means. I guess it make sense as the over all showy ness or Flaccid size of my unit has definitely increased overall.
The second pic is a non measured Erect comparison from the night before op to now, I couldn't get the images to exactly match up but you can definitely see the drastic difference as I went from a concave Girth to an whatever the opposite of concave Girth is. You can also so my slight aesthetic irregularities on my right side.
The third is just a loosely measured chub pic.
So it seems my mid shaft Girth increased slightly less than 1" with R1 (I think my actual pre MSEG was closer to 4.7in before), which I think is an amazing and great result which I'm super super happy about. My base Girth also increased around 1" which is awesome, but makes condoms pretty shitty.
Please Log in or Create an account to join the conversation.
Re: JLMB's PMMA Thread
13 years 7 months ago #1276332111First trial ended up a failure, I hadn't realized how much thicker my Flaccid was until I put it through the base and could barely get it. They don't have bigger bases I don't think, which makes it difficult with our PMMA tapers. I got a bit of a chub which subsided, but then after building the rods out to my needed length and put it on the Erection threatened to come back so I couldn't linger too long. I think my body just thinks the new extender is too exciting right now, and it'll dull down, I seem to remember similar Erection problems when first using my old one.
Please Log in or Create an account to join the conversation.
Re: JLMB's PMMA Thread
13 years 7 months ago #1276332370Please Log in or Create an account to join the conversation.
Re: JLMB's PMMA Thread
13 years 7 months ago #1276333383Please Log in or Create an account to join the conversation.
Re: JLMB's PMMA Thread
13 years 6 months ago #1276354587Please Log in or Create an account to join the conversation.
Re: JLMB's PMMA Thread
13 years 6 months ago #1276355108I started PE I think when I was around 17, and I remember being maybe 6in long. Since then I have tried numerous manual PE methods, regular Jelqing, stretching, Clamping, extending, pumping, with Hanging being my newest method. I never really was very consistent with any of them perhaps besides the beginning where I completed the manual PE newbie routine several times from ThundersPlace. I remember finally measuring past 7in sometime while a freshman in Uni and being really excited as I kept having to remind myself that I had a 7in Cock and that I was officially above average haha, but I cannot really contribute the gains to PE over puberty as I wasn't really systematic at anything. All I know is that the 'health' of your penis definitely improves when engaging in light manual PE, an many can gain a bit just from promoting more healthy vascularity.
My opinions on the other methods varies. Pumping is definitely just an occasional hobby for me, I don't think it does anything besides short term vascularity increase and or swelling, but definitely not a good look for showing off or actual sexual play. Clamping is something to be done with more caution and knowledge, but definitely is better than Clamping in my opinion as it promotes engorgement internally rather than externally, and has less fluid buildup and the after pump is harder and feels better and great for sex, and I could see how it might contribute to permanent gains I just haven't done it regularly enough to see. The little Hanging I've done was great, and I definitely think, depending on your anatomy of course, that it is the best option for manual length increase but its just not the easiest to get into.
The fact that my current partner is without PE or PMMA bigger than me has revived (maybe for the worse) my desire for all around size gains, so I'd like to see what length I can stretch out before my next PMMA session (this summer). My current course for manual PE from here out is Hanging with extender use after, and probably casual Clamping on the side (hard to fit in as you don't want a swollen unit for Hanging or extending, especially as I cant fit it in easily).
Here is a unplayed (havent started jerking or anything so its not supper engorged or anything) Erect photo, and then it compared with a good Girth goal end of the line for my unit In my opinion. I think maybe it might look a bit girthy aesthetic wise for some, but I have a slightly different perspective on that I think haha.
(Sorry about watermark, just realized that my photoshopped photos would be good stealing for a shill's website or something)
Please Log in or Create an account to join the conversation.
Re: JLMB's PMMA Thread
13 years 6 months ago #1276362594- Skeptical_One
-
- Offline
- General
-
- Posts: 4979
- Thanks: 613
Please Log in or Create an account to join the conversation.
Re: JLMB's PMMA Thread
13 years 6 months ago #1276416845I know it's not, just amazing results... wow
Dark
Please Log in or Create an account to join the conversation.
Re: JLMB's PMMA Thread
13 years 6 months ago #1276418455Please Log in or Create an account to join the conversation.
Re: JLMB's PMMA Thread
13 years 3 months ago #1277893798Heres my 10 months post R1 pic with dildo comparison, the dildo is 7"long and 4.75" around, the Girth surprisingly used to be mine as well.
Please Log in or Create an account to join the conversation.
Re: JLMB's PMMA Thread
13 years 1 month ago #1278528654We have a Flaccid swollen pic, then two hard attempts.
Love the size, its great and heavy, but I know not to get too attached ; ) the swelling has remained pretty minimal though at the moment, with wrapping and vrief sleeve use.
I got 27cc, mostly 30% with a handful of 10% at top.
Ill post more details when i get another moment.
Please Log in or Create an account to join the conversation.